luna@ironflon.com    +86-577-62802555
Cont

कोई भी प्रश्न है?

+86-577-62802555

Feb 02, 2024

1. Plastic insulated wire: Its advantages are good insulation performance, simple manufacturing process, and low price. It can replace rubber insulation regardless of whether it is exposed or piped, thus saving a lot of rubber and cotton yarn.

2. Neoprene rubber insulated wires: good oil resistance, not prone to mildew, no flame retardation, good climate adaptability, slow photoaging process, and the aging time is about twice that of ordinary rubber insulated wires, so they are suitable for outdoor laying. Since the mechanical strength of the insulation layer is weaker than ordinary rubber, it is not recommended for pipe laying.

3. Overhead insulated wires: Used increasingly widely, they have excellent light aging resistance and are mainly used in places with high groundwater levels and chemically corrosive liquid overflows. When there are not many wires required outside the second factory area and it is inconvenient to bury them underground, this wire It is particularly suitable for the reconstruction of urban distribution lines.

4. Visco-impregnated low-insulation power wires: allow for higher operating temperatures, low dielectric loss, high voltage resistance, and long service life. Its shortcomings are poor bending properties of the insulation material and cannot be laid at low temperatures, otherwise the insulation will be easily damaged.

5. Polyvinyl chloride insulated and sheathed power wires (referred to as all-plastic wires or plastic wires) are easy to process, have no laying height difference restrictions, are light in weight, have good bending properties, are easy to make joints, are oil-resistant, acid-alkali-resistant, and do not delay flames. It has an internal armored structure to protect the steel strip or wire from corrosion and is cheap.

6. Rubber insulated power wire: It has good bending performance and can be laid in severe cold climates. It is especially suitable for laying lines with horizontal height differences and vertical laying occasions. It is not only suitable for fixed laid lines, but also for fixed laid lines that move regularly.

7. Metal sheathed mineral insulated wire: high temperature resistant, with copper or aluminum outer sheath and magnesium oxide insulation. It is suitable for steel industry, power plants, oil depots, high-rise building nuclear power plants, oil production platforms, cold storage, etc. AC rated voltage 500V (DC voltage 1000V) and below high temperature, high humidity, flammable and explosive environments.

जांच भेजें